PELICE 2016

April 7-8, 2016 | Atlanta, Georgia

The Educational Event for the Worldwide Wood Products Industries Including Veneer, Plywood, OSB, MDF, Particleboard, Engineered Wood Products, Mass Timber and Value Added

 

REGISTRATIONEXHIBITORS LIST

2016 Agenda

THURSDAY, APRIL 7

EXHIBITORS/ATTENDEES BREAKFAST
(Grand Ballroom North)
7:15-8:15 a.m.

MORNING KEYNOTERS SESSION
(Rooms B-C)

8:30-8:35 a.m.
Welcoming Remarks & Keynoters Introduction
—Rich Donnell, Conference Co-Chairman; Editor-in-Chief, Panel World

8:40-9:00 a.m.
In Pursuit of Perfection: Building a New OSB Plant
—Jonathan Martin, Chairman and CEO, Martin Companies, LLC

9:05-9:25 a.m.
Why Build a Plywood Mill in 2016?
—Steve Swanson, President and CEO, Swanson Group

9:30-9:50 a.m.
Building From Disaster: Winston Veneer & Plywood
—Kurt Liebich, CEO, RedBuilt and New Wood Resources

TIME OUT WITH EXHIBITORS
(Grand Ballroom North)
10:0-10:30 a.m.

CONCURRENT SESSIONS
(Rooms A-B-C)

PRODUCTION TECHNOLOGIES
(Room A)

10:35-10:55 a.m.
Capitalizing on New Veneer Lathe and Dryer Technologies
—Alan Knokey, Vice President, USNR

11:00-11:20 a.m.
Log Lathe Systems: New Developments in Automatic Veneer Peeling Lines
—Anna McCann, President, Merritt Machinery, LLC, Meinan Representative

11:25-11:45 a.m.
Advances in Veneer Dryer Control
—John Robinson, Principal; Roger Douglas, Director of Engineering, Drying Technology, Inc

ADHESIVES ISSUES & PERFORMANCE PART I
(Room B)

10:35-10:55 a.m.
Traversing the Maze of Adhesive Standards and Regulations
—Jim Griswold, New Business Development Manager, Hexion

11:00-11:20 a.m.
Optimizing Resin, Wax and Release Agent Effectiveness with PanelSpray Technology
—Brian Valley, Director of Industrial Solutions, Spraying Systems Co.

OPERATIONS PLANNING
(Room B)

11:30-11:50 a.m.
Value Creation Through Engineering
—Scott Stamey, Senior Project Manager, Mid-South Engineering

11:55-12:15 p.m.
Emerging Trends in Technology Solutions for Improving Operational Performance
—Bijan Shams, President, Cogent Industrial Technologies

HEAT ENERGY & EMISSIONS ISSUES & TECHNOLOGIES
(Room C)

10:35-10:55 a.m.
Air Quality Hot Topics Affecting Panel & Engineered Lumber Facilities
—Wes Younger, Managing Consultant, Trinity Consultants

11:00-11:20 a.m.
Impact of Wood Species, Moisture Variation and Drying Technology on Volatile Organic Compound Emissions from Rotary Dryers
—Tyler Player, Principal, Player Design, Inc.

11:25-11:45 a.m.
Latest Energy Systems and Dryer Systems Concepts
—Dirk Koltze, Executive Vice President, Büttner/ Siempelkamp

INTERNATIONAL DEVELOPMENTS
(Birch Room-Atrium Terrace)

10:35-10:55 a.m.
Engineered Wood Trends in Europe
—Heikki Vidgren, Principal, Pöyry Management Consulting

10:55-11:15 a.m.
Reinvention of the North American Plywood and Veneer-Based Industry
—Dr. Richard Baldwin, Managing Partner, Oak Creek Investments

11:15-11:35 a.m.
Engineered Strand Lumber—Challenges and Opportunities
—Dr. W. Ernest Hsu, Principal, Hsu Consulting

11:35-11:55 a.m.
New Trends in the Development of Wood and Natural Fiber Based Products
—Dr.-Ing. Bohumil Kasal, Director, Fraunhofer WilhelmKlauditz-Institut, WKI

11:55-12:15 p.m.
Status and Problems of the Lumber and Panel Products Industries of the Philippines
—Romulo Aggangan, Director Forest Products Research and Development Institute (FPRDI), Department of Science and Technology, Philippines

EXHIBITORS/ATTENDEES LUNCH
12:10-1:30 p.m.

AFTERNOON KEYNOTERS SESSION
(Rooms B-C)

1:35-1:40 p.m.
Remarks and Introductions
—Dan Shell, Managing Editor, Panel World

1:45-2:05 p.m.
Innovation as a Winning Strategy
—Brian Carlson, President, Huber Engineered Woods LLC

2:10-2:30 p.m.
Air Emission Control Technology Trends in the Wood Panelboard and Engineered Lumber Industry: A Supplier’s Perspective
—Rodney Schwartz, Vice-President of Sales-Americas, B&W MEGTEC

TIME OUT WITH EXHIBITORS
2:40-3:00 p.m.

CHINA TRANSITIONS TO A NEW PARADIGM
(Room A)
Moderated by Dr. Fred Kurpiel

3:05-3:25 p.m.
China Is a Global Opportunity
—Dr. Fred Kurpiel, President, Georgia Research Institute

3:30-3:50 p.m.
An Overview of the Engineered Wood Panel Industry of China
—Dr. Hui Wan, Associate Professor, Forest Composite Products, Mississippi State University

3:55-4:15 p.m.
Market Demands—Engineered Strand Products and Applications
—Dr. W. Ernest Hsu, Hsu Consulting

4:20-4:40 p.m.
China—Product Developments and Innovations
—Colin Folco, Modernizaton Manager, Dieffenbacher, USA

ADHESIVES ISSUES & PERFORMANCE PART II
(Room B)

Keeping It Together: Technological Advances in Wood Adhesives
—Moderator Linda Caudill, Managing Director, WoodBased Composites Center

3:05-3:25 p.m.
Engineered Fillers/Extenders for Wood Composites: Technologies to Extend and Enhance Phenolic and pMDI Adhesives
—Dr. Sudip Chowdhury, Group Leader, Fillers & Extenders; Matt Peterson, Coatings Chemist, Willamette Valley Company

3:25-3:45 p.m.
Engineered Wood Adhesives Improve Production Efficiency
—Yaqiu Zhao, Adhesive Product Development Leader, Ashland Specialty Ingredients

3:45-4:05 p.m.
Adhesive Technology Drives Mass Wood Innovation
—Chris Whelan, Senior Business Development Manager, Henkel Corporation

4:05-4:25 p.m.
Lignin: Moving Toward Renewable Bio-Based Adhesives
—Mojgan Nejad, Assistant Professor, Mississippi State University

4:25-4:45 p.m.
Wood-Generated Formaldehyde
—Charles Frazier, Professor and Director, Wood-Based Composites I/UCRC, Virginia Tech

ENVIRONMENTAL ISSUES & TECHNOLOGIES
PART I
(Room C)

3:05-3:25 p.m.
Dual-Biophase Bio-Oxidation—A Green, Energy-Efficient Approach to VOC and HAP Emission Destruction
—Nathan Hess, Applications Engineer, Process Combustion Corp.

3:30-3:50 p.m.
Meeting EPA Emission Standards with Cyclones
—Mike Clark, PE, Regional Sales Manager, Fisher-Klosterman Emtrol

3:55-4:15 p.m.
Wet Scrubbers: Upgrading and Results
—Magnus Rundqwist, V.P. Business Development, Wechsler Engineering & Consulting, Inc.

4:20-4:40 p.m.
Water Recycle and Reuse in the Wood Products Industries
—Dr. Rakesh Govind, President, PRD Tech, Inc.

EXHIBITORS/ATTENDEES SOCIAL
5:00-7:00 p.m.

FRIDAY, APRIL 8

EXHIBITORS/ATTENDEES BREAKFAST
7:15-8:15 a.m.

MORNING KEYNOTERS SESSION
(ROOMS B-C)

8:30-8:35 a.m.
Welcoming Remarks and Keynoters Introduction
—Fred Kurpiel, Conference CoChairman

8:40-9:00 a.m.
Reason for Optimism in North American Composite Wood Industry
—Jackson Morrill, President, Composite Panel Association

9:05-9:25 a.m.
Global Wood-Based Panels Markets—Trends and Outlook
—Dr. George Goroyias, SeniorPrincipal, Pöyry Management Consulting

9:30-9:50 a.m.
Why Proteak? How an Entrepreneur Became Involved in Mexico’s Newest MDF Operation
—Luis Tejado, President, Blue Drop

TIME OUT WITH EXHIBITORS
10:00-10:30 a.m.

CONCURRENT SESSIONS
(Rooms A-B-C)

SAFETY ISSUES & TECHNOLOGIES
(Room A)

10:35-10:55 a.m.
Thermal Oil Hazards: Risk Identification and Prevention
—Tom Wechsler, President, Wechsler Engineering and Consulting

11:00-11:20 a.m.
Proven Fire Protection Systems for the Engineered Panel and Lumber Industries
—Jeff Nichols, Managing Partner, Industrial Fire Prevention, LLC

11:25-11:45 a.m.
Prevention of Fires and Dust Explosions within the Panel Industry
—Mikael Jidenius, Area Sales Manager, North America, Firefly AB

11:50-12:10 p.m.
How to Reduce Risks of Combustible Dust: New Standards, New Technologies
—Jordan Newton, Vice President of Engineering, SonicAire/IES

QC & OPTIMIZATION
(Room B)

10:35-10:55 a.m.
Optimization of Production in Short Cycle Press Lines: First Startup in North America
—Thomas Franz, Managing Director, Baumer Inspection GmbH

11:00-11:20 a.m.
Moving Towards Smart Factory Using Automatic Scanner and Panel Repair Technology
—Tor Gustavsen, Managing Director, Argos Solutions

11:25-11:45 a.m.
Developments in Online Quality Control for the Manufacture of Composite and Engineered Wood Panels
—Andrew Jowett, President, IMAL

ENVIRONMENTAL ISSUES & TECHNOLOGIES PART II
(Room C)

10:35-10:55 a.m.
Air Compliance Auditing Tips for Panel & Engineered Lumber Facilities
—Brad James, Manager of Consulting Services, Trinity Consultants

11:00-11:20 a.m.
Reducing RTO Annual Fuel Costs with Fine-Tuning Features
—Rodney Pennington, VP of Key Accounts, NESTEC, Inc.

11:25-11:45 a.m.
The Key to Good WESP Operation Is in the Water Treatment System
—Jim Cash, Senior Product Engineer, B&W MEGTEC

EXHIBITORS/ATTENDEES LUNCH
12:10-1:30 p.m.

2016 News

“The World Is Run By Those Who Show Up”

“The World Is Run By Those Who Show Up”

Finding out that web site registration for the upcoming Panel & Engineered Lumber International Conference & Expo (PELICE) is closed? Don't despair. You can walk up the day of the event and pay the same fee without penalty. "You can also come for just one day...

One Week Of On-Line Registration Remains For PELICE

One Week Of On-Line Registration Remains For PELICE

There's one week remaining for on-line registration to the Panel & Engineered Lumber International Conference & Expo (PELICE). Organizers announce that on-line (web site) registration will continue until March 28, Monday morning, 8 a.m., at which time the web...

2016 Photos

Register Now!

March 14-15, 2024 | Atlanta, Georgia

PELICE is the Educational Event for the Worldwide Wood Products Industries Including Veneer, Plywood, OSB, MDF, Particleboard, Engineered Wood Products, Mass Timber and Value Added